Rodeo Sport 4WD V6-3.2L (2002)
1. Insert horn terminal from behind black connector NO. 12 until connector lock works.
2. Push white connector into the black connector for a double lock.
Installation
1. Set cancel cam and SRS coil in position and install the SRS coil to combination switch by tightening the four bolts to a specified tightening torque
with four bolts.
Torque: 0.5 N.m (0.05 kg m / 0.4 lb ft)
2. Insert the horn terminal into the connector NO. 12 and bind the combination switch harness and SRS coil harness with a tape. Refer to How to
Connect the horn terminal in this section.
