Rodeo Sport 4WD V6-3.2L (2002)
Standard: 0.45 mm to 0.75 mm (0.0177 in to 0.0295 in)
Limit: 0.2 mm (0.008 in)
Brush
1. Measure the length of brush.
2. Replace with a new one, if it is below the limit.
Standard: 15 mm (0.5906 in)
Limit: 11 mm (0.43 in)
Brush Holder
Check for continuity between brush holder (+) (4) and base (- ). Replace, if there is continuity (i.e., insulation is broken).
Brush Spring
Use spring balancer to measure the spring setting force when removing the spring from the brush.
Standard: 17.65 - 23.54 N (38.9-51.9 lb)
Limit: 11.77 N (25.9 lb)
Magnetic Switch
Temporarily connect the magnetic switch between the overrunning clutch and housing.
Perform the steps described below in 3 to 5 seconds.
