Rodeo Sport 4WD V6-3.2L (2002)
1. Pull in test
Connect the ground (-) to terminal C and magnetic switch body.
Verify that the pinion pulls out when the battery (+) pole is connected to terminal 50.
2. Hold in test.
Observe that the pinion stays when the lead wire is disconnected from terminal C.
3. Return test.
Connect the ground (-) to terminal 50 and magnetic switch body.
Verify that the pinion pulls out when the battery (+) pole is connected to terminal C and the pinion pulls away when the lead wire is disconnected
from terminal 50.
Field Coil
