Rodeo Sport 4WD V6-3.2L (2002)
3. Install upper ball joint and tighten the nut to the specified torque, with just enough additional torque to align cotter pin holes. Install new cotter
pin.
Torque: 98 Nm (72 ft. lbs.)
4. Install lower ball joint and tighten the nut to the specified torque, with just enough additional torque to align cotter pin holes. Install new cotter pin.
Torque: 147 Nm (108 ft. lbs.)
5. Install back plate.
6. Install wheel speed sensor.
7. Install torsion bar.
Note: Adjust the trim height.
