Rodeo Sport 4WD V6-3.2L (2002)
27. Using 3/4" round labels mask off the Pop-nuts. Using tape mask off other related bracket mounting locations (see Figures 49 and 50). This is
required to inhibit Noxudol chemicals from coating the bracket mounting surfaces.
28. Follow steps 6 through 10 in the section of this bulletin entitled "Condition Two: Apply Noxudol 700 and Noxudol 300."
29. Change to the spray valve and spray 1 light coat of Noxudol 700 onto inner and outer frame rail of both driver and passenger side. Wipe away any
drips from the bottom of the frame rail. See Figure 51.
30. Change to the spray valve and spray one coat of Noxudol 300 one onto inner and outer frame rail of both driver and passenger side. See Figure 52.
31. Remove tape and labels from the masked areas called out in step 26.
32. Install both Type "B" brackets using the stud and nut from step 15 together with 32 new mounting bolts (P/N 8-98174-544-0) provided in the
bracket kit.