isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Ignition Switch - Won't Turn to The Lock Position|Page 2083 > < Ignition Switch - Won't Turn to The Lock Position|Page 2081

Rodeo Sport 4WD V6-3.2L (2002)

Page 2
background image

6. Remove center console.

7. Remove selector lever knob and cover.
8. Disconnect select cable.
9. Disconnect shift lock cable.

10. Disconnect harness connector.

11. Remove selector lever subassembly.

Installation 

1. Install selector lever subassembly.
2. Connect harness connector.

Ignition Switch - Won't Turn to The Lock Position|Page 2083 > < Ignition Switch - Won't Turn to The Lock Position|Page 2081