Rodeo Sport 4WD V6-3.2L (2002)
2. Remove the power window switch/regulator handle.
-
Pry out the power window switch and remove the connectors.
-
To remove the regulator handle (1), remove the clip (2) at the root of the handle by using wire with hook.
3. Remove the screw while pulling the inside lever toward you and then remove the inside handle.
4. Remove speaker grille (3).
-
Pull out the front side of the grille.
5. Remove the speaker assembly (2).
-
Remove the 4 screws and disconnect the speaker harness connector (1).