Rodeo Sport 4WD V6-3.2L (2002)
Quarter Window Glass: Service and Repair
Rear Quarter Glass (LWB)
Rear Quarter Glass (LWB)
Parts Location
Removal
1. Disconnect the battery ground cable.
2. Remove the rear quarter trim panel.
3. Remove the rear quarter glass.
Installation
1. Rear quarter glass.
-
Clean the bonding surfaces of both the glass and the body panel.
-
Be absolutely sure to apply glass primer to the side glass.
-
Be absolutely sure to apply body primer fully to the body.
NOTE: Immediately wipe off the primer left on the body or extruded sealant.
-
Attach the fastener to the indicated position of body with sealant as shown in the figure.
-
Apply the sealant to the circumference of glass as shown in the figure.
-
Insert the location pins on glass into the panel, push the glass against the panel, and bond them.
