Rodeo Sport 4WD V6-3.2L (2002)
6. Apply the adhesive (1) to the windshield.
-
After drying primer completely, apply a sealing adhesive (Sun star #555 or equivalent) along the edge of the glass so that the sealing adhesive
has a 20 mm (0.79 in) junction at middle of the base of the glass.
NOTE: Apply an adhesive 3 minutes or more but within 24 hours after the application of primer. If more than 24 hours have passed, reapply
primer.
Adhesive should be handled as follows:
1. Use the adhesive manufactured 3 months or less ago.
2. Wipe off adhesive-stains on positions other than requires application.
7. Install the windshield.
-
Set the windshield with sealing adhesive applied to entire circumference in the body panel. Specifically, adjust the windshield support with the
upper molding making contact with the body panel, press the glass and tighten the windshield support.
NOTE: Affix the glass within 5 minutes of application.
