isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Body/Interior - Noise Diagnosis & Repair|Page 4340 > < Body/Interior - Noise Diagnosis & Repair|Page 4338
Page 9
background image

2.

On back of hood, trim approximately 1/16" from corner of hood, as shown, to allow clearance between hood and instrument panel.

3.

Reinstall instrument panel hood assembly.

^

Use the existing Flat Rate Manual labor operation.

Repair Chart K

Complaint: Squeak in A/T lever

Cause: A/T lever rubbing against bezel

Repair:
1.

Remove front console.

Body/Interior - Noise Diagnosis & Repair|Page 4340 > < Body/Interior - Noise Diagnosis & Repair|Page 4338