Trooper (2 Door) V6-3165cc 3.2L DOHC (6VD1) (1992)
Timing Belt: Service and Repair
The DOHC and SOHC engines both use the same Service and Repair procedure from Isuzu. Make note that the DOHC and SOHC engines
both use a single gear for the camshaft but use different alignment marks.
Removal
Preparation: Battery ground cable.
1. Air cleaner assembly
2. Radiator upper fan shroud
-
Remove from radiator.
3. Cooling fan assembly
-
Remove four nuts, then the cooling fan assembly.
4. Power steering pump drive belt
5. Air conditioning compressor drive belt
6. Generator drive belt.
7. Fan pulley assembly.
8. Crankshaft pulley assembly
-
Using special tool J-8614-O1, hold crankshaft pulley.
-
Remove center bolt, then the pulley.
9. Oil cooler hose
-
Remove two cooler hose bracket fixing bolts on the timing cover.
10. Timing belt cover.
11. Pusher.
CAUTION: The Pusher prevents air from entering the oil chamber. Its rod must always be facing upward.