isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

LS Models|Page 5046 > < Diagram Information and Instructions|Page 5043
Page 1
background image

Cargo Lamp: Description and Operation
LS Models

Battery voltage is applied at all times to fuse C-17 and to the dome, map, courtesy, and luggage room lights.

DOME LIGHT

With a door open, a ground path is provided by the closed door switch and the dome light goes on. When the open door is closed, the door switch opens
to ground removing the ground signal to the timer. The dome light begins to dim approximately 3 seconds after closing the door. With the doors closed,
the dome light can be turned on by pushing the indicated portion of the light lens. It goes off when pushed again, regardless of the door position.

COURTESY LIGHTS

With a front door open, a ground path is provided by the closed front door switch and the front courtesy lights go on. With a rear door open, a ground
path is provided by the closed rear door switch and the rear courtesy lights go on. Opening a front door does not turn on the rear courtesy lights and
opening a rear door does not turn on the front courtesy lights.

LUGGAGE ROOM LIGHTS

With the tailgate open and the luggage room light switch in the DOOR position, a ground path is provided by the closed tailgate switch and the luggage
room light goes on. With the tailgate closed, the luggage room light can be turned on by turning the luggage room light switch to ON.

MAP LIGHTS

When either the left or right map light switch is depressed, battery voltage is applied to that particular light and the map light goes on.

LS Models|Page 5046 > < Diagram Information and Instructions|Page 5043