isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Fluid - M/T > < Fluid - A/T|Capacity Specifications|Page 643
Page 1
background image

Fluid - A/T: Service and Repair

CHANGING TRANSMISSION FLUID

There is no need to change the transmission fluid unless the transmission is used under one or more of the following heavy duty conditions.

A: Repeated short trips
B: Driving on rough roads
C: Driving on dusty roads
D: Towing a trailer

If the vehicle is used under these conditions, change the fluid every 20,000 miles (32,000 km.)

There is no drain plug in the oil pan. Oil should be extracted with suitable suction device through the filler tube. Alternately the fluid can be drained
by carefully removing the oil pan. Place a large drain pan under the oil pan, remove 13 bolts on the right, left and front sides of the oil pan and loosen
3 bolts on the rear side.

Drain the fluid carefully.

Hold the pan horizontally, remove the remaining 3 bolts and remove pan and gasket. Clean the oil pan and reinstall it with a new gasket. It is also
recommended to replace the fixing bolts. Tighten 16 fixing bolts to 11 Nm (8 lb. ft.) torque.

Fluid - M/T > < Fluid - A/T|Capacity Specifications|Page 643