isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Body/Interior - Noise Diagnosis & Repair|Page 4532 > < Body/Interior - Noise Diagnosis & Repair|Page 4530
Page 7
background image

2.

Install a 5-inch length of Noise Reduction Tape to the power antenna motor cover, as shown.

3.

Reinstall power antenna motor assembly as described in the appropriate Workshop Manual.

^

Use sublet code B1 for $ 0.50.

^

Use the existing Flat Rate Manual labor operation.

Repair Chart G

Complaint: Rattle in upper right side of engine compartment

Cause: Windshield washer reservoir contacting inner front fender

Repair:
1.

Remove windshield washer reservoir as described in the appropriate Workshop Manual.

2.

Install several 4-inch lengths of FOAM TAPE (listed in "Parts Information" section of this Service Bulletin) to the side of the reservoir tank, as
shown.

3.

Reinstall windshield washer reservoir as described in the appropriate Workshop Manual.

^

Use sublet code B6 for $ 2.25.

^

Use the existing Flat Rate Manual labor operation.

Repair Chart H

Complaint: Glovebox rattles

Cause: Glovebox contact with dash panel

Repair:
1.

Remove glovebox.

Body/Interior - Noise Diagnosis & Repair|Page 4532 > < Body/Interior - Noise Diagnosis & Repair|Page 4530