Trooper (4 Door) V6-3165cc 3.2L DOHC (6VD1) (1992)
Oil Cooler: Service and Repair
REMOVAL
NOTE: Remove battery ground cable
1. Oil filter
-
Remove using the filter wrench: J-36390, or equivalent.
2. Engine coolant hoses
-
Disconnect two coolant hoses from oil cooler.
3. Oil cooler
-
Remove center bolt, then the oil cooler.
-
Check oil cooler and center bolt for cracks, flaws and other damage, and replace as necessary.
INSTALLATION
1. Oil cooler [3]
-
Clean sealing surfaces of oil cooler and cylinder body.
-
Install center bolt and oil cooler on the oil cooler adapter, and tighten center bolt to 26 Nm (20 ft. lbs.).
2. Engine coolant hoses [2]
3. Oil filter [1]