Trooper (4 Door) V6-3165cc 3.2L DOHC (6VD1) (1992)
4. Align the alignment mark (white line) on the timing belt with the alignment mark on the RH bank camshaft timing pulley (on the left side as
viewed from the front of the vehicle). Secure the belt with a double clip.
5. Turn the crankshaft counterclockwise to remove the belt slack between the crankshaft timing pulley and the RH bank camshaft timing pulley.
6. Install the belt on the water pump pulley.
7. Install the belt on the idle pulley.
8. Align the alignment mark (white line) on the timing belt with the alignment mark on the LH bank camshaft timing pulley. (If the belt is difficult
to install, turn the camshaft pulley slightly counterclockwise.)
9. Turn the crankshaft pulley clockwise to give some slack between the crankshaft timing pulley and the RH bank camshaft timing pulley.
10. Install the pusher while pushing the tension pulley to the belt.