Trooper (4 Door) V6-3165cc 3.2L DOHC (6VD1) (1992)
6.
Using a heat gun, mold the heat shrink tubing while maintaining a 30 mm distance for 30 seconds around the diameter of the accelerator cable
housing and dust cover (see figure 5).
NOTE:
To avoid injury or damage, do not touch the heat shrink tubing. The heat shrink tubing and the surrounding area will be hot at contact.
7.
Reattach the inner cable to the throttle body cam (see figure 6).
8.
Verify the accelerator cable is able to move freely and easily.