isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

A/T Mode Switch - No Crank In Neutral Position|Page 3744 > < A/T Mode Switch - No Crank In Neutral Position|Page 3742
Page 1
background image

Neutral Safety Switch: Service and Repair

REMOVE OR DISCONNECT

- Negative (-) battery cable.
- Place selector lever in neutral
- Mode switch cover
- Selector lever
- Selector lever from the mode switch.

- Heat protector from the converter housing.
- Air cleaner assembly

- Harness connector
- Mode switch connector from the engine harness.
- Harness clip from the clip bracket of the engine.
- Remove two mode switch bolts.
- Remove mode switch.

A/T Mode Switch - No Crank In Neutral Position|Page 3744 > < A/T Mode Switch - No Crank In Neutral Position|Page 3742