Trooper (4 Door) V6-3165cc 3.2L DOHC (6VD1) (1992)
/v6-3165cc_3.2l_dohc_(6vd1)/Page-1491001.png)
Windshield: All Technical Service Bulletins
Windshield Molding - Vibration/Buzz Noise
BULLETIN NUMBER:
SB96-11-L005
ISSUE DATE:
JUNE 1996
GROUP:
BODY
1992-96 TROOPER (UX) WINDSHIELD MOLDING
VIBRATION/BUZZING NOISE
AFFECTED VEHICLES
1992-96 Trooper (UX) models.
SERVICE INFORMATION
Some affected vehicles may experience a vibration/buzzing noise coming from the driver or passenger side A-pillar area when traveling at speeds over
60 miles per hour.
To eliminate this vibration/buzzing noise, seal the windshield molding to the A-pillar with ThreeBond 1207B Silicone Gasket (Part No. 2-90067-801-0)
using the procedure in this Service Bulletin.
SERVICE PROCEDURE
CLEANING
A-Pillar (Right/Left)
^
Clean A-pillar surface thoroughly using suitable non-abrasive cleaning product.
SILICONE GASKET
APPLICATION
Windshield Molding (Right/Left)
