Trooper II L4-1949cc (G200z) (1984)
Wheel Hub: Service and Repair
1.
Raise vehicle and remove tire and wheel assembly.
2.
Remove free wheeling hub assembly as described under ``Free Wheeling Hub, Replace.''
3.
Remove disc brake support and caliper assembly then secure on frame with wire.
4.
Remove lock washer and hub nut using front hub nut wrench then remove hub and rotor assembly.
5.
Separate hub from rotor if replacing either component.
6.
Reverse procedure to install. Refer to ``Wheel Bearings, Adjust'' for wheel bearing adjustment procedure.