isuzu Workshop Repair Guides

Isuzu Trooper II L4-2238cc DSL Workshop Service and Auto Repair Manuals

Turn Signal Switch > < Headlamp Switch|Service and Repair
Page 1
background image

Headlamp Switch: Service and Repair

1.

Disconnect battery ground cable.

2.

Remove steering wheel center pad.

3.

Using steering wheel puller J-29752, remove steering wheel.

4.

Remove screws securing upper and lower steering column covers. Disconnect electrical connectors.

5.

Remove windshield wiper/washer switch and/or combination turn signal, headlight dimmer and hazard warning switch by removing retaining
screws.

6.

Remove lock cylinder housing by removing snap ring and washer followed by attaching bolts.

7.

Reverse procedure to install.

Turn Signal Switch > < Headlamp Switch|Service and Repair