isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Customer Interest for Oil Pressure Sender: > < Front Crankshaft Seal|Service and Repair
Page 1
background image

Oil Pressure Sender: All Technical Service Bulletins
Oil Pressure Gauge - Reads Too Low

 BULLETIN NUMBER SB89-01-001
ISSUE DATE January 5, 1989
GROUP ENGINE
VEHICLES AFFECTED

1987 Trooper II (KT) models with gasoline engine.

FIGURE 1

SERVICE INFORMATION

At cruising speeds, the oil pressure gauge may indicate that the oil pressure has dropped to about 8-10 psi, without illuminating the oil pressure warning
light. If the oil pressure gauge reading is lower than the actual oil pressure, this could be caused by a faulty condenser (Figure 1), located on the oil
pressure gauge sending unit. Replacing the condenser may eliminate this condition.
PARTS INFORMATION

Part No.

Description

8-94460-971-1

Oil Pressure Condenser

FLAT RATE MANUAL UPDATE INFORMATION

OPERATION

OPERATION

TASK

TIME

NUMBER

Oil Pressure Condenser

010631

Replace

.2

Customer Interest for Oil Pressure Sender: > < Front Crankshaft Seal|Service and Repair