Trooper II L4-2559cc 2.6L SOHC (4ZE1) (1989)
Timing Mark
-
Move No. 4 cylinder to TDC on compression stroke. Be sure timing marks are aligned.
-
Apply engine oil to distributor O-ring.
Alignment Marks
-
Align distributor case setting mark with distributor shaft setting mark.
-
Fit distributor to cylinder head and align distributor shaft setting mark with cylinder head setting mark.
-
Refit valve cover.
-
Tighten distributor mounting bolt to:
14 ft lb (19 Nm)
-
Refit spark plug wires.
-
Check and adjust ignition timing. Refer to Powertrain Management/Ignition System/Adjustments.