Trooper II L4-2559cc 2.6L SOHC (4ZE1) (1989)
Clutch Pedal Assembly: Adjustments
INSPECTION AND REPAIR
Make necessary adjustments, repairs, and part replacements if wear, damage, or other problems are discovered during inspection.
Pedal free play and height
Clutch Pedal Height (H2):
232.5 - 242.5 mm (9.15 - 9.55 in)
Play: (H1)
5 - 15 mm (0.2 - 0.6 in)
Clutch pedal height and free play adjustment
1. (a) If equipped with cruise control:
Remove clutch switch connector. Loosen lock nut, then turn switch out until there is a gap between the switch plunger and clutch pedal.
(b) If not equipped with cruise control:
Loosen clutch pedal adjusting bolt.
2. Loosen clutch master cylinder push rod lock nut. Turn push rod by hand to set clutch pedal height to within specification.
NOTE: Measure clutch pedal height from the firewall, not from the floorboard.