Trooper II L4-2559cc 2.6L SOHC (4ZE1) (1989)
Clutch Hub: Testing and Inspection
CLUTCH HUB AND INSERT CLEARANCE
Use a thickness gauge to measure the clearance between the clutch hub and the insert.
If the measured value exceeds the specified limit, the clutch hub and the insert must be replaced.
CLUTCH HUB SPLINE PLAY
1. Set a dial indicator to the clutch hub to be measured.
2. Move the clutch hub as far as possible to both the right and the left.
Note the dial indicator reading.
If the measured value exceeds the specified limit, the clutch hub must be replaced.