isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2407 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2405

Trooper LS 2WD V6-3.5L (2001)

Page 1
background image

Manifold Absolute Pressure Sensor: Service and Repair

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR

REMOVAL PROCEDURE

1. Disconnect the negative battery cable.

2. Disconnect the electrical connector from the MAP sensor.

3. Remove the bolt securing the MAP sensor to the mounting bracket on the common chamber.

4. Remove the MAP sensor from the mounting bracket.

INSTALLATION PROCEDURE

Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2407 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2405