Trooper LS 2WD V6-3.5L (2001)
Throttle Body: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Drain the cooling system.
3. Disconnect the electrical connectors:
-
Throttle position (TP) sensor.
-
Intake air temperature (IAT) sensor.
4. Disconnect the vacuum hose below the air horn.
5. Remove the intake air duct clamp.
6. Disconnect the intake air duct.
7. Disconnect the coolant lines from the throttle body.
8. Remove the bolts from the common chamber.
9. Remove the throttle body from the common chamber.
10. Remove the gasket from the common chamber.
11. Remove the TP sensor.
INSTALLATION PROCEDURE
1. Install the TP sensor.