Trooper LS 2WD V6-3.5L (2001)
Cleaning Method
Tap the air cleaner filter gently so as not to damage the paper filter, or clean the element by blowing with compressed air of about 490 kPa (71 psi) from
the clean side if it is extremely dirty.
INSTALLATION
1. Install air cleaner element (5).
2. Attach the air cleaner duct cover to the body completely, then clamp it with the clip (4).
3. Install mass air flow sensor (3).
4. Install air temperature sensor (2).
5. Install positive crankcase ventilation hose connector (1).