Trooper LS 2WD V6-3.5L (2001)
Removal
1. Remove the seat lock cover(3)
2. Remove the rear seat belt/buckle assembly(1).
3. Disconnect the link connecting the lock assemblies on the both sides, and then remove the rear seat lock assembly(2).
Installation
To install, follow the removal steps in the reverse order, noting the following point.
1. Tighten the seat lock fixing bolts to the specified torque.
Torque: 42 Nm (31 lb ft)
Rear Seat Strikers
Rear Seat Strikers
Removal
1. Fold the rear seat assembly to the front direction.
2. Remove the luggage floor box(1).
3. Remove the rear seat striker(2).
Installation
To install, follow the removal steps in the reverse order, noting the following point.
1. Tighten the striker fixing bolts to the specified torque.
Torque: 40 Nm (30 lb ft)
Rear Center Seat Belt / Buckle Assembly
