Trooper LS 2WD V6-3.5L (2001)
10. Apply a setting mark (1) across the steering wheel and shaft so parts can be reassembled in their original position.
11. Move the front wheels to the straight ahead position, then use steering wheel remover J-29752 to remove the steering wheel.
Caution: Never apply force to the steering wheel in direction of the shaft by using a hammer or other impact tools in an attempt to remove the
steering wheel. The steering shaft is designed as an energy absorbing unit.
Warning: THE INFLATOR MODULE SHOULD ALWAYS BE CARRIED WITH THE URETHANE COVER AWAY FROM YOUR
BODY AND SHOULD ALWAYS BE LAID ON A FLAT SURFACE WITH THE URETHANE SIDE UP. THIS IS NECESSARY
BECAUSE A FREE SPACE IS PROVIDED TO ALLOW THE AIR CUSHION TO EXPAND IN THE UNLIKELY EVENT OF
ACCIDENTAL DEPLOYMENT. OTHERWISE, PERSONAL INJURY MAY RESULT.
12. Remove steering column cover.
13. Disconnect the wiring harness connectors located under the steering column.
