Trooper LS 2WD V6-3.5L (2001)
Starter Motor: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. Loosen the nut (1) on terminal "M" of magnetic switch and disconnect the connector cable.
2. Remove bolt (2 pcs) (2).
3. Remove magnetic switch (5).
4. Remove dust cover (4).
5. Remove torsion spring bolts, then the magnetic switch assembly.
6. Remove torsion spring (3) from magnetic switch assembly(5).
7. Remove screw (2 pcs) (8).
8. Remove through bolt (2 pcs) (7).
9. Remove screws and through bolts, then the rear cover (9) then remove thrust washer (10).