Trooper LS 2WD V6-3.5L (2001)
-
Apply a sealing adhesive (4) to the circumference of the windshield (5).
-
Apply the sealing adhesive to the flange portion of the cowl upper rail.
-
Adjust the gap clearance of the windshield (5).
-
Install the windshield to the body panel by applying pressure to the windshield.
-
Cure the adhesive at a temperature of 20-30 °C (68-86 °F) for 24 hours.
-
Check that the windshield does not leak water.
