Trooper LS 4WD V6-3.5L (2002)
10. Remove steering column cover.
11. Disconnect the wiring harness connectors located under the steering column, then remove combination switch and SRS coil assembly.
Note: The SRS coil is a part of the combination switch assembly, which can not be replaced separately. Therefore, be sure not to remove the SRS
coil from the combination switch assembly.
Installation
1. Install combination switch and SRS coil assembly. After installation of combination switch assembly, connect the combination switch wiring
harness connector and the SRS 2-way connector located under the steering column. Then turn the SRS coil counterclockwise to full, return about 3
turns and align the neutral mark.
Caution: When turning the SRS coil counterclockwise to full, stop turning it resistance is felt forced further turning may damage to the cable in
the SRS coil.
