isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Power Window Motor Inspection|Page 5888 > < Power Window Motor Inspection
Page 2
background image

Disconnect the switch connector and apply battery voltage to the harness side connector terminals to check its function.

2.  Circuit inspection between front power window switch-LH/power window relay and front passenger power window switch

1.  Disconnect the front passenger switch connector [D-14]
2.  Check to see if battery voltage applied at 2[D-14], 5[D-14] and the ground when starter switch is "ON" position. Repair a poor connection of

the connectors or an open circuit between 2[D-14] and 12[H-18], 5[D-14] and 4[H-19].

3.  Inspection of the front passenger window motor

Disconnect the motor connector and apply battery voltage to the motor side connector terminals to check its function.
Repair or replace the motor when the result of inspection is found abnormal.

Power Window Motor Inspection|Page 5888 > < Power Window Motor Inspection