isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Rear Door Exterior Handle|Service and Repair|Page 5895 > < Power Window Motor Inspection|Page 5889
Page 1
background image

Rear Door Exterior Handle: Service and Repair

FRONT OUTSIDE HANDLE AND DOOR LOCK CYLINDER

Fig. 10-66

Removal

Preparation:

Disconnect the battery ground cable

1. Remove Door trim panel

2. Remove Waterproof sheet

Refer to "WINDOW REGULATOR" removal procedure in this section.

3. Remove Outside handle

Disconnect the locking links (arrow marks the positions) and key switch connector if model is equipped with anti-theft.

Fig. 10-67

4. Remove Key switch (W/Anti-theft)

Rear Door Exterior Handle|Service and Repair|Page 5895 > < Power Window Motor Inspection|Page 5889