Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
Fig. 10-71
3. Tighten the outside handle and key switch fixing bolts to the specified torque.
• Torque Nm (lb ft) ............................................................................................................................................................................................ 9(78)
4. Check for smooth outside handle and lock cylinder operation.
REAR OUTSIDE HANDLE
Fig. 10-72
Removal
Preparation:
•
Disconnect the battery ground cable
1. Remove Door trim panel
2. Remove Waterproof sheet
•
Refer to "WINDOW REGULATOR" removal procedure in this section.
3. Remove Outside handle
•
Disconnect the locking links (arrow marks the positions) and remove the 3 fixing bolts.