Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
Cruise Control Actuator: Service and Repair
Preparation: Disconnect the battery ground cable.
1. Pump
^ Disconnect the connector.
^ Disconnect the vacuum hose.
^ Remove the pump fixing screws.
2. Actuator
^ Disconnect the inner cables of the actuator at the accelerator pedal.
^ Remove the outer cable clips.
^ Remove the actuator fixing screws.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following point.
1. Take care not to bend the cable excessively.