isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Temperature Gauge|Testing and Inspection > < Diagram Information and Instructions|Page 1913
Page 1
background image

Temperature Gauge: Description and Operation

The engine coolant temperature gauge consists of two intersecting coils wound around a permanent magnet rotor. When voltage through fuse C-10 is
applied to the coils, a magnetic field is generated. This causes the rotor to rotate and the gauge needle to move. The magnetic field is controlled by the
engine coolant temperature sending unit. As the resistance in the sending unit varies, current through the gauge coils changes, and the gauge needle
moves according to the changing magnetic field. See the chart below for approximate resistance values for the sending unit under normal operating
conditions.

Engine Coolant Temperature ................................................................................................  Engine Coolant Temperature Sending Unit's Resistance

140°F/60°C .............................................................................................................................................................................................................   160 ohm

150°F/66°C .............................................................................................................................................................................................................   135 ohm

160°F/71°C .............................................................................................................................................................................................................   110 ohm

170°F/77°C ...............................................................................................................................................................................................................   90 ohm

180°F/82°C ...............................................................................................................................................................................................................   75 ohm

190°F/88°C ...............................................................................................................................................................................................................   60 ohm

Temperature Gauge|Testing and Inspection > < Diagram Information and Instructions|Page 1913