Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
number.
^
Apply engine oil to the thread and sealing surface of each nut.
^
Tighten nuts to 54 Nm (40 ft. lbs.).
NOTE: Do not apply engine oil to the bearing back faces and connecting rod bearing fitting surfaces.
^
After tightening the nuts, make sure that the crankshaft rotates smoothly.
2. Oil gallery [5]
^
Tighten the bolts in 2 steps, in the order shown.
-
1st step tighten to 29 Nm (22 ft. lbs.).
-
2nd step tighten 55 - 65° more.
3. Oil strainer and rubber ring [4]
4. Oil pipe and rubber ring [3]
5. Oil pan [2]
6. Cylinder head [1]