Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
NOTE:
^
When changing piston/connecting rod combinations, do not change the piston/piston pin combination.
^
Do not reuse the old piston pin.
^
Attach the piston to the connecting rod with the piston front mark and the connecting rod mark on the same side.
^
With the piston pin service set: J-24086-C, or equivalent and a press, press fit the piston pin.
^
Heat the connecting rod small end to a suitable temperature to ensure smooth installation.
4. Piston ring [8]
^
Install the piston rings with the piston ring expander.
The compression ring must be set with the T mark facing up.
^
Install piston rings in the following sequence.
a. Oil ring
1. Expander ring