isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Left Hand Side|Page 1506 > < Valve Cover|Specifications
Page 1
background image

Valve Cover: Service and Repair
Left Hand Side

REMOVAL 
 
NOTE:  Remove battery ground cable.
 

1. Air cleaner duct assembly
2. Exhaust gas recirculation pipe

^

Remove flare nut from EGR valve.

^

Remove fixing bolts on cylinder head cover.

^

Remove two fixing bolts on exhaust manifold.

3. Positive crankcase ventilation valve
4. Camshaft angle sensor connector
5. Ground cable

^

Remove fixing bolts on cylinder head cover.

6. Ignition coil connector and Ignition coil

^

Disconnect three connectors from ignition coil. Remove harness bracket bolt on cylinder head cover.

^

Remove fixing bolts on ignition coil.

7. Throttle body and cable

^

Remove four fixing bolts from common chamber.

8. Cylinder head cover Remove 11 fixing bolts, then the cylinder head cover.

Left Hand Side|Page 1506 > < Valve Cover|Specifications