isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Combination Switch|Testing and Inspection|Page 7288 > < Combination Switch|Testing and Inspection|Page 7286
Page 2
background image

b. Disconnect the yellow 2way SRS connector located behind the inflator module.

WARNING:  The inflator module should always be carried with the urethane cover away from your body and should always be laid on a
flat surface with the urethane side up. This is necessary because a free space is provided to allow the air cushion to expand in the unlikely
event of accidental deployment. Otherwise, personal injury may result
.

5. Steering wheel as follows:

a. Apply a setting mark across the steering wheel and shaft so parts can be reassembled in their original position.

b. Use special tool. Remove the steering wheel. Move the tires to the straight ahead position before removing the steering wheel.

CAUTION:  Never apply force to the steering wheel in direction of the shaft by using a hammer or other impact tools in an attempt to remove the
steering wheel. The steering shaft is designed as an energy absorbing unit.

6. Steering column cover.

Combination Switch|Testing and Inspection|Page 7288 > < Combination Switch|Testing and Inspection|Page 7286