Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
Alignment: Service and Repair
Caster
CAUTION: Left and right side to be equal within 1/3.
The caster angle can be adjusted by means of the caster shims installed between the chassis frame and fulcrum pins. Tighten the fulcrum pin bolt to the
specified torque 152 Nm (112 ft. lbs.).
NOTE: Difference of the caster shim front/rear thickness shall be 3.6 mm (0.142 inch) or less. Overall thickness of caster shim and camber shim shall
be 10.8 mm (0.425 inch) or less.