isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Shift Indicator > < Malfunction Indicator Lamp - A/T|Description and Operation|Page 3539
Page 2
background image

(2) Verify if instrument panel terminal 7 of connector I-1 is shorted to battery or open.
(3) Verify if the PCM connector J1 (RED) terminal A14 is shorted to battery or open.
(4) Verify that the instrument panel terminal 6 of connector I-1 is connected to Battery. If not check the Fuses and the connections (terminal 10 of

connector H-25) voltage.

(5) IF problem solved: GOTO CHECK TRANS INDICATOR.

NO: Replace Powertrain Control Module (PCM).

Shift Indicator > < Malfunction Indicator Lamp - A/T|Description and Operation|Page 3539