Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
NOTE:
^
Discard used snap rings and install new ones.
^
When the bearing cap is in position, select and attach a snap ring of suitable thickness so that the end play of the spider pin is held within 0.1
mm (0.004 inch).
Snap ring thickness:
Blue: 1.5 mm (0.059 inch).
White: 1.53 mm (0.060 inch).
Yellow: 1.59 mm (0.063 inch)
Green: 1.62 mm (0.064 inch).
^
Be sure to use snap rings of the same thickness on both sides.