Trooper LTD V6-3165cc 3.2L SOHC MFI (6VD1) (1997)
/Page-1338002.png)
2. Ball bearing.
-
Use a bearing remover to remove the ball bearing.
3. Lock nut
-
Install the front companion flange temporarily.
-
Use the companion flange holder J-37221 or equivalent, and lock nut wrench J-37219 or equivalent, to remove the lock nut.
-
Remove the front companion flange.
4. Snap ring Automatic Transmission (A/T).
5. Input shaft assembly (A/T)
-
Remove the input shaft assembly from the transfer case.
6. High-low clutch hub and sleeve.
