Trooper LTD 4WD V6-3.5L (2002)
4. Remove the mounting bolts(No.1-4) on either side.
-
No.1 - Hold in check not to turn from the inside of the front fender.
-
No.2 - Remove the front door sill plate and dash side trim panel, turn over the floor carpet and hold the bolt in check not to turn.
-
No.3 - Remove the rear door sill plate and center pillar lower trim cover, turn over the floor carpet and hold the bolt in check not to turn.
-
No.4 - Remove the bolt from under the frame.
5. Loosen the mounting bolts (No. 5-6) on either side.
6. Remove the frame side mounting and washer.
7. Gently lower the jack supporting the front axle until the cab side mounting can be removed.
8. Remove the cab side mounting.
-
Be sure to use a splice bar around the mounting to be removed.
Removal (No.3-No.6)
