Trooper LTD 4WD V6-3.5L (2002)
Sunroof / Moonroof Drain: Service and Repair
Sun Roof Drain Hose (Front Side)
Sun Roof Drain Hose (Front Side) And Associated Parts
Sun Roof Drain Hose (Front Side)
Removal
1. Remove the front inner liner.
2. Remove the headlining. Refer to the Headlining removal steps in Body Structure.
3. Remove the instrument panel assembly. Refer to the Instrument Panel Assembly removal steps in Body Structure.
4. Disconnect the drain hose at the frame complete side.
5. Apply the soap and water to the body panel grommet.
6. Pass the string from the sun roof frame side through the drain port side, and remove the drain hose from the hose fixing clips. Taking care not to
allow the body panel grommet to be removed together with the hose, pull the drain hose only to the inside of the vehicle. (The string should be
kept as it is.)
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Apply the soap and water to the body panel grommet.
2. Install the drain hose from inside of the vehicle by utilizing, as a guide, the string passed during removal step.
3. The body panel grommet must not be twisted or caught in during installation.
4. Complete routing, avoiding extreme bends or curves.
5. After routing, install the trim with care not to allow the drain hose to be caught in.
6. Test the drain condition.
7. The protrusion of drain hose from the body panel must be within 50 mm (2.0 in). If it exceeds 50 mm (2.0 in) after correct routing, cut the leading
