Trooper LTD 4WD V6-3.5L (2002)
6. Remove the front cover.
7. Remove the front lower cover.
8. Remove the rear cover.
9. Remove the outer cover.
-
Disconnect the switch connectors and remove the harness fixing clips.
10. Remove the switch assembly.
-
Remove the switch fixing screws from the outer cover.
11. Remove the armrest assembly.
-
Open the armrest fastener and remove the fixing bolt.
12. Remove the trim cover.
13. Remove the pad & frame assembly.
14. Remove the inner cover
-
Remove the cover fixing screw.
-
Pull up the inner cover to remove the cover from the reclining device(3).
15. Remove the back board assembly(4).
-
Remove the board fixing screws.
-
Pull the back board downward and remove the board from the seat back frame(5).