Trooper LTD 4WD V6-3.5L (2002)
Lateral Accelerometer: Service and Repair
G-Sensor
Removal
1) Remove center console.
2) Remove clip from G-sensor connector, then disconnect connector.
3) Remove G-sensor assembly fixing bolt (2).
4) Remove G-sensor assembly (3).
Installation
1) Install G-sensor assembly (3).
^
Care should be taken so that the G-sensor is not installed in the wrong direction.
2) Install G-sensor assembly fixing bolt (2).
^
Tighten the fixing bolt to the specified torque.
Torque: 10 Nm (87 inch lbs.)
3) Install G-sensor wiring connector (1).
4) Install center console.
